SSL and HTTPS

You can configure Incredibuild to use secure communication between internal components (SSL), and to use HTTPS when accessing the Incredibuild user interfaces. When this setting is enabled, traffic is automatically redirected from HTTP to HTTPS, and the port 8081 is used instead of 8080.

To Enable SSL Using Incredibuild's Self-Signed Certficiate

Go to the Coordinator Settings > Network tab and use the SSL checkbox (disabled by default):

Enable SSL Using a Custom SSL Certificate

If you want to use your own certificate instead of Increduild's self-signed certificate, you can upload your certificate manually.

  1. Go to the Coordinator Settings > Network tab and check SSL. 

  2. Run the following script pointing to your certificate. Both the certificate and key must be base64 encoded and the key cannot be password protected.

    /opt/incredibuild/management/ib_cert.sh install <cert> <key>

Switch Certificates

If you have more than one certificate loaded into Incredibuild, you can switch using the following command:

/opt/incredibuild/management/ib_cert.sh select ib|user

Regenerate Incredibuild's Self-Signed Certificate

If your certificate expired or you want to regenerate Incredibuild's certificate for any other reason, use the following command:

/opt/incredibuild/management/ib_cert.sh regenerate