Modifying Ports

Several ports need to be open for the operation of Incredibuild Linux. They can be changed directly during installation by using flags, or after installation in the Coordinator and Agent settings.

Port Name Description Default Where to Open Modifying the Port
Agent Control Port Used for the communication between an Initiator Agent and a Helper Agent. 2088, 2089

Agents

 Changed in Coordinator Settings only.
Coordinator Utility Port Used for the communication between the Coordinator and the Initiator and Helper Agents, for transferring system information and status about the machines that host the Agents. 9953

Coordinator and Agents

 Must be changed in both Coordinator Settings and each Agent's Settings.
Coordinator Session Port Used for the communication between the Coordinator and an Initiator Agent 9952

Coordinator and Agents

 Change in Coordinator Settings only.
Agent Webserver Port Used for the communication between your browser and the Web Management Console of the Agents. 8080

Coordinator and Agents

 Change in each Agent's Settings only.
HTTPS Webserver Port Used for secure communication between your browser and the Web Management Console of the Agents. 8081

Coordinator and Agents

 Change in each Agent's Settings only.

Secondary Coordinator Port

Used to connect from the Secondary Coordinator to the Primary Coordinator. To modify the port, see Secondary Coordinator.

9954

Coordinators (primary and secondary)

Change in Coordinator Settings of Primary Coordinator

Message Transport Port

 Used for internal communication in the Coordinator. Only required for communication between Incredibuild components inside the Coordinator machine.

5672

Coordinator

Cannot be changed after installation.

Modifying a Port in the Coordinator Settings

  1. Go to the Coordinator Manager > Settings area.

  2. In the Network area, change the ports as needed.

  3. Click Save all. In some cases, you may also need to update the port on every agent using the procedure below.

Modifying a Port in the Agent Settings

In some cases, modifying a port requires you to modify the settings of every agent.

  1. Open the Management Console of the Agent whose Agent Control Port you want to change, by opening the browser and entering the following address:
    http://<IP address of the Agent machine>:8080/Incredibuild/

  2. Click Agent Settings.

  3. In the Network tab, change the ports as needed.

  4. Click Update Settings and then Close.